TVA

• Rectangular VAV terminal units for use in ventilation and air conditioning systems
• For control, inductor and shut-off tasks in the extract air area with high acoustic requirements
• Integral attenuator
• Closed-loop volume flow control using an external power supply
• For variable or constant volume flow systems
• Shut-off via override control by others
• Can also be used for duct or room pressure control with suitable control components
  
  

• Integral attenuator with at least 26 dB insertion loss at 250 Hz
• Hygiene tested and certified
• Factory set-up or programming and aerodynamic function testing
• Setting and subsequent parameterisation on the control component possible, separate setting device may be required
  
  

Nominal sizes

125, 160, 200, 250, 315, 400

• TVA: Extract air unit
• TVA-D: Extract air unit with acoustic cladding
• Units with acoustic cladding and/or secondary silencer Type TS for very demanding acoustic requirements
• Acoustic cladding cannot be retrofitted
  
  

• Ready-to-commission unit which consists of mechanical parts and control components
• Averaging effective pressure sensor for volume flow rate measurement
• Damper blade
• Integral attenuator
• Factory assembled control components complete with wiring and tubing
• Aerodynamic functional testing on a special test rig prior to shipping of each unit
• Set-up data is given on a label or volume flow rate scale affixed to the unit
• High control accuracy even in case of unfavourable upstream conditions
  
  

• EASY controller: Compact unit consisting of controller with potentiometers, effective pressure transducer and actuator
• Compact controller: Compact unit consisting of controller with potentiometers, effective pressure transducer and actuator
• Universal controllers: Controllers, differential pressure transducers and actuators for special applications
• LABCONTROL: Control components for air management systems
  
  

Accessories

• Double lip seal (factory fitted)

Useful additions

• Secondary silencer Type TS

• Rectangular casing
• Spigot on the fan end suitable for circular ducts to EN 1506 or EN 13180
• Spigot with groove for double lip seal
• Connection on the room end suitable for ducts
• Baffle plate is fitted after the damper blade for optimum aerodynamic performance
• Position of the damper blade indicated externally at shaft extension
• Thermal and acoustic insulation (lining)
  
  

• Damper blade seal made of TPE plastic
• Lining is mineral wool
• Effective pressure sensor made of aluminium
• Plastic plain bearings
• Shaft and linkage made of galvanised steel

• Acoustic cladding made of galvanised sheet steel
• Lining is mineral wool
• Rubber elements for the insulation of structure-borne noise

• To EN 13501, fire rating Class A1, non-combustible
• RAL quality mark RAL-GZ 388
• Non-hazardous to health thanks to being highly biosoluble in accordance with the Ordinance on Hazardous Substances and Note Q of the European Directive (EC) No. 1272/2008
• Faced with glass fibre fabric as protection against erosion through airflow velocities of up to 20 m/s
• Inert to fungal and bacterial growth
  
  

• EN 16798, Part 3
• VDI 6022, Sheet 1
• DIN 1946, Part 4
• Further standards, guidelines in accordance with hygiene certificate

• NS 125 – 200
• EN 1751, Class C
• NS 250 – 400
• EN 1751, Class B

Closed blade air leakage:

• EN 1751, Class 4
• Meets the increased requirements of DIN 1946, Part 4, with regard to the acceptable closed damper blade air leakage

Maintenance

• Maintenance-free as construction and materials are not subject to wear
  
  

Disclosure of Chemicals

RoHS EU Directive 2011/65/EU (RoHS)This product or individual variants comply with EU Directive 2011/65/EU (RoHS) on the restriction of the use of certain hazardous substances in electrical and electronic equipment. For more information, please refer to our Environmental Product Declarations. REACH 1907/2006 (EC Regulation REACH)This product or individual variants comply with the provisions of EC Regulation No. 1907/2006, also known as REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals). For more information, please refer to our Environmental Product Declarations