Típus EM-TRF-USV

For the connection of EASYLAB to the 230 V mains and for uninterruptible power supply

Expansion module for the direct connection of EASYLAB controllers Type TCU3 and adapter modules Type TAM to the 230 V mains, including uninterruptible power supply

  • Double-stack terminal blocks for 230 V supply voltage connection
  • Electric plug connection to the main PCB
  • The expansion module is fitted into the casing with the EASYLAB base component
  • Uninterruptible power supply for the connected modules
  • Integral battery charging electronics with charge status indicator
  • Power failure is signalled to the EASYLAB control panels
  • Controller action in case of a power failure can be defined

Expansion module EM-TRF-USV 00137397_0


  • Application
  • Description

Application

  • Expansion module Type EM-TRF-USV for the EASYLAB system
  • For the connection of EASYLAB base components (controller TCU3 or adapter module TAM) to the 230 V AC supply voltage (mains)
  • Power supply for the base component and the connected modules
  • Battery pack ensures uninterrupted power supply even in case of a mains power failure
  • Control and/or alarm signalling even in case of a power failure
  • Factory mounted or for retrofitting into the EASYLAB base component casing

Special characteristics

  • Ready for installation, can be easily connected to the main PCB
  • Double-stack terminal blocks for 230 V AC supply voltage connection
  • Simple electrical connection of expansion module and EASYLAB main PCB using a connection plug
  • Simple wiring of switch-operated fume cupboard lighting in combination with the EM-LIGHT expansion module
  • Intelligent charge control with trickle charging, deep discharge protection, and reverse voltage protection
  • Operating state indicator light
  • Controlled response in case of a power failure can be defined (EASYLAB TCU3 with expansion module EM-TRF-USV)
  • In case of a power failure: Optical signal on the control panel; configurable alarm signalling

Parts and characteristics

  • Mains transformer 230 V AC (primary), 24 V AC (secondary)
  • Intelligent charge control with trickle charging, deep discharge protection, and reverse voltage protection
  • Operating state indicator light
  • PCB plug connector to connect the module to the EASYLAB main PCB

Useful additions

  • EasyConnect: Configuration software for the commissioning and diagnosis of EASYLAB components

Construction features

  • PCB dimensions and fixing points correspond to the EASYLAB main PCB and the casing
  • Fixing with screws
  • Double-stack terminal blocks for simply 230 V supply voltage connection

Műszaki információk

  • Function
  • Technical data
  • Specification text
  • Order code
EM-TRF-USV 00131605_0
① Primary fuse
② Connection terminals for supply voltage
③ Operating state indicator light
④ PCB plug connector to connect the module to the main PCB
⑤ Socket for battery pack
⑥ Battery pack
⑦ Mounting bracket
⑧ Connecting cable


Supply voltage230 V AC ± 10 %, 50/60 Hz
Primary fuse50 mA slow blow, 250 V
Power consumptionup to 40 VA for a controller with all expansion modules; up to 35 VA for a fume cupboard controller with control panel; up to 33 VA for a room controller with control panel; up to 29 VA for a room controller without control panel; up to 9 VA for an EASYLAB adapter module TAM
Operation in case of a power failureOne controller (TCU3 or TAM) with control panel, standard operation will be maintained for approx. 4.5 h, defined damper blade positions and power failure signalling will be maintained for approx. 6 h
Battery pack charging1500 mAh
Battery lifeup to 4 years; when stored without trickle charging, 6 months
Double-stack terminal blocksCable cross-section up to 2.5 mm²
Operating temperature0 – 50 °C
IEC protection classI (protective earth)
Protection levelIP 20
EC conformityEMC to 2004/108/EU, low voltage to 2006/95/EU
Weight2.4 kg (including 1.1 kg for battery pack)


Expansion module for the EASYLAB base component (controller TCU3 or adapter module TAM) that can be directly connected to a 230 V AC supply voltage. The expansion module includes a transformer whose secondary voltage (24 V) is equal to the supply voltage for the controller and the expansion modules connected to it.

Uninterruptible power supply (UPS) by means of a battery pack that maintains defined functions in case of a power failure.

Special characteristics

  • Ready for installation, can be easily connected to the main PCB
  • Double-stack terminal blocks for 230 V AC supply voltage connection
  • Simple electrical connection of expansion module and EASYLAB main PCB using a connection plug
  • Simple wiring of switch-operated fume cupboard lighting in combination with the EM-LIGHT expansion module
  • Intelligent charge control with trickle charging, deep discharge protection, and reverse voltage protection
  • Operating state indicator light
  • Controlled response in case of a power failure can be defined (EASYLAB TCU3 with expansion module EM-TRF-USV)
  • In case of a power failure: Optical signal on the control panel; configurable alarm signalling

Technical data

  • Supply voltage: 230 V AC ± 10 %, 50/60 Hz
  • Power consumption: up to 40 VA for a controller with all expansion modules; up to 35 VA for a fume cupboard controller with control panel; up to 33 VA for a room controller with control panel; up to 29 VA for a room controller without control panel; up to 9 VA for an EASYLAB adapter module TAM
  • Operation in case of a power failure: One controller (TCU3 or TAM) with control panel, standard operation will be maintained for approx. 4.5 h, defined damper blade positions and power failure signalling will be maintained for approx. 6 h
  • Battery pack charging: 1500 mA
  • Battery life: up to 4 years
  • Double-stack terminal blocks: Cable cross-section up to 2.5 mm²
  • Protection level: IP 20

em-trf-usv

Letöltések

Oldal megosztása

Oldal ajánlása

Oldal ajánlása, hivatkozás küldése e-mailben.

A *-gal jelölt mezők kitöltése kötelező.

Oldal megosztása

Köszönjük, hogy ajánlott minket!

Ajánlását elküldtük és hamarosan meg kell érkeznie.


Kapcsolat

Hol tartózkodik Ön?

Visual contact Visual contact

Adja meg üzenetét és kérése típusát
Tel.: +36 (1)212-1211 | Fax: +36 (1)212-0735

A *-gal jelölt mezők kitöltése kötelező.

Kapcsolat

Köszönjük üzenetét!

Visual contact Visual contact

Az üzenet elküldve, hamarosan feldolgozzuk. Szervizigényekkel foglalkozó részlegünk a lehető leghamarabb felveszi Önnel a kapcsolatot.
Általános, termékekkel, szolgáltatásokkal kapcsolatos kérdéseivel a következő telefonszámokon is fordulhat hozzánk:
Tel.: +36 (1)212-1211 | Fax: +36 (1)212-0735

Kapcsolat

Hol tartózkodik Ön?

Visual contact Visual contact

Adja meg üzenetét és kérése típusát
Tel.: +36 (1)212-1211 | Fax: +36 (1)212-0735

Attachment (max. 10MB)

A *-gal jelölt mezők kitöltése kötelező.

Kapcsolat

Köszönjük üzenetét!

Visual contact Visual contact

Az üzenet elküldve, hamarosan feldolgozzuk. Szervizigényekkel foglalkozó részlegünk a lehető leghamarabb felveszi Önnel a kapcsolatot.
Általános, termékekkel, szolgáltatásokkal kapcsolatos kérdéseivel a következő telefonszámokon is fordulhat hozzánk:
Tel.: +36 (1)212-1211 | Fax: +36 (1)212-0735